Products
Home | Cooling Tower Parts | FRP Fan Stack | FRP Fan Stack
FRP Fan Stack
Brand NEWIN
Contact Now
  • Specification
  • Main parts
  • Application
  • Product Literation

Model H1 H2 H3 Φ Φ3 Φ1 Φ2 Nos of pcs per set
4.70  3000 1200 300 4760 4998 5664 5844 24
5.00  3000 1200 300 5060 5298 5964 6144 28
5.50  3000 1200 300 5520 5758 6424 6604 28
6.00  3000 1200 300 6060 6298 6964 7144 32
7.00  3800 1650 400 7060 7404 8472 8652 36
7.70  3800 1650 400 7760 8104 9172 9352 40
8.00  3800 1650 400 8070 8414 9482 9662 40
8.50  3800 1650 400 8610 8954 10022 10202 44
9.14  3800 1650 400 9220 9564 10632 10812 48
9.75  3800 1650 400 9834 10178 11246 11426 48
10.36  3800 1650 400 10460 10804 11872 12052 52



 cooling tower fan stack project 1
 cooling tower fan stack project 2
 cooling tower fan stack project 3

Recently Viewed Products
  • Counter Flow Square Cooling Tower NSH-1000 Counter Flow Square Cooling Tower NSH-1000

    NSH series counter flow square type cooling tower is available in capacity for single cell from 40 tons to 1000 tons, various modular combinations of cooling towers are designed to meet different requirements. This type of cooling tower is mainly used in heating, ventilation, air-conditioning, and light to medium processing applications.

  • Fanless cooling tower NWE Fan-less FRP Cooling Tower

     NWE Fan-less cooling tower is born on basis of environmental protection and benefit to descendents, whole cooling tower is without fan and motor, which totally consists of static parts, completely comply with national standard GB7190.0-2008 on super low noise cooling tower. Meanwhile, NWE fan less cooling tower has no moving parts, which protects user's living environment to the largest extent.

  • cross flow closed circuit cooling tower LKH-200 cross flow closed circuit cooling tower LKH-200

    Cross flow closed circuit cooling tower LKH-200 specification   I. Design Condition Water processing capacity: 200 m3/ h △t = 5℃ ( Inlet 37℃, outlet 32℃ )          Design wet bulb temperature:28℃          Design dry bulb temperature: 31.5℃          Atmosphere: 99,400Pa D II. Selection Model    Closed circuit cross flow cooling tower     Model: LKH-200   III. Cooling tower performance data sheet(single cell)   Model LKH-200 Water flow rate 200 m3/ h Temperature in 37℃ Temperature out 32℃(2-5℃ above WBT in summer) WTB 28℃ Temperature decrease 5℃ heat exchanging capacity 1,000,000 kcal/h Power 3φ-380V/50Hz Total power 11.5 kW Drift loss 0.005% Noise level Not more than 75dB(A) According to GB9068 measurement      Axial fan Quantity 4 sets Air volume 80000m3/ h Power 1.5 Kw x 4 Speed 720r/min Air pressure 140pa   Spray pump Quantity 1 set Water volume 130 m3/ h Power 5.5 Kw Coil pressure 1.2 Mpa Water Resistance <80KPa Inlet pipe diameter DN 150 Outlet pipe diameter DN150     dimension Length 4350 mm Width 2340 mm Height 3645 mm        Weight Net weight (kg) 2650 Operation weight (kg) 6930    ※ We reserve the right to modify the above information without further notice.

  • counter flow closed circuit cooling tower LKM-20 Counter flow closed circuit cooling tower LKM-20

    LKM series closed circuit cooling tower is a kind of high efficient heat exchange equipment which comes into being on the basis of absorbing the most advanced foreign heat-exchange technology.  The Air intake style is inlet from the bottom of the tower, which is alternating direction interactive with the fall down spray water and from to saturated vapor in the process. The heat is exhausted out of tower by the fan and the water is collected to bottom tank and circulate continuously by the special evaporator. There is no heat sinking fillings inside of the tower, so more space is saved to increase coil area. This apply especially to suit for smaller fluid cooling fluid in low temperature or small temperature difference.   Technical parameters of LKM series closed circuit cooling tower          Item  Water Flow (m3/h) Fan Spray Pump Inlet/Outlet  Pipe Dia.  (mm) Weight (kg) Dimension          Model Air Volume   (m3/h) Power  (KW) Flow  (m³/h) Power  (KW) Net Weight Run. Weight L×W×H      (mm) LKM-5 5 10500 0.55 14 0.75 50 T:350 600 1150x900x1920 LKM-8 8 13050 0.75 14 0.75 65 T:400 700 1150x1150x1920 LKM-10 10 26100 0.75*2 30 1.1 65 T:520 1000 2000x1150x2200 LKM-15 15 26100 0.75*2 30 1.1 65 T:570 1100 2000x1150x2200 LKM-20 20 36600 1.1*2 40 1.5 80 T:650 1600 2500x1150x2200 LKM-25 25 36600 1.1*2 40 1.5 80 T:750 1700 2500x1150x2350 LKM-35 35 40600 1.5*2 40 1.5 80 T:850 1800 2500x1400x2650 LKM-40 40 40600 1.5*2 60 1.5 100 T:1050 2000 2500x1400x2650 40600 1.5*2 60 1.5 100 G:2150 3000 3000x1400x2650 LKM-50 50 46900 2.2*2 60 1.5 100 T:1250 2300 2500x1400x2650 46900 2.2*2 60 1.5 100 G:2450 3500 3000x1400x2650 LKM-60 60 53000 2.6*2 60 1.5 100 T:1350 2400 2500x1400x2650 53000 2.6*2 60 1.5 100 G:2650 3700 3000x1400x2650 LKM-70 70 63800 3.5*2 65 2.2 100 T:1650 3000 3000x1400x2850 63800 3.5*2 65 2.2 100 G:2950 4300 3518x1400x3310 LKM-80 80 90000 4*2 65 2.2 125 T:1850 3300 3000x1400x2850 90000 4*2 65 2.2 125 G:3560 5000 3518x2180x3310 LKM-100 100 90000 4*2 110 3 125 T:2050 3800 3000x2180x2850 90000 4*2 110 3 125 G:4150 5900 3518x2180x3310 LKM-125 125 110000 5.5*2 110 3 100*2 T:2450 4300 3518x2180x3250 110000 5.5*2 110 4 100*2 G:5150 7000 4010x2180x3910 LKM-150 150 150000 7.5*2 110 3 100*2 T:3150 4300 3518x2180x2850 150000 7.5*2 140 4 100*2 G:6500 8100 4010x2980x3910 LKM-175 175 180000 7.5*2 170 5.5 100*2 T:3700 7100 4010x2980x3910 180000 7.5*2 220 7.5 100*2 G:7120 10500 5380x2980x3910 LKM-200 200 220000 7.5*2 170 5.5 125*2 T:4180 7600 4010x2980x3910 220000 7.5*2 220 7.5 125*2 G:8300 11700 5380x2980x3910 LKM-250 250 300000 11*2 170 5.5 125*2 T:5050 8900 4510x2980x3910 300000 11*2 220 7.5 125*2 G:10680 14600 5380x2180x3910 LKM-300 300 300000 7.5*4 220 3*2 100*4 T:6300 8600 7036x2180x2850 300000 7.5*4 220 3*2 100*4 G:12100 16200 8020x2980x3910 LKM-350 350 360000 7.5*4 340 5.5*2 125*4 T:7400 14200 8020x2980x3910 360000 7.5*4 440 7.5*2 125*4 G:14240 21000 107600x2980x3910 LKM-400 400 440000 7.5*4 340 5.5*2 125*4 T:8360 15200 8020x2980x3910 440000 7.5*4 440 7.5*2 125*4 G:16600 23400 107600x2980x3910 LKM-500 500 600000 11*4 340 5.5*2 125*4 T:10100 17800 8020x2980x3910 600000 11*4 440 7.5*2 125*4 G:21360 29200 107600x2980x3910  ※ We reserve the right to modify the above information without further notice.

  • counter flow cooling tower NWI Industrial FRP Cooling Tower

    NWI Seires Industrial Cooling Tower is widely used in industries of Electric Power, Petroleum, Chemical Engineering, Chemical Fertilizer, Smelt, etc. Cooling water capacity ranges from 800 m3/h - 4000 m3/h. According to Customers' request, we also supply high temperature type, sewage type, and also designed to different shape to match with the customer's site location.

Copyright © Shenzhen Newin Machinery Co., Ltd.All Rights Reserved.